Category: DIGITAL SOUND SYSTEM PROCESSORS, ENIGMA
26i
HIGH PERFORMANCE 2-IN/6-OUT DIGITAL LOUDSPEAKER PROCESSOR
Features
- Outstanding Performance Excellent sonic performance with 24bit high end converters coupled with 96khz sample rate
- 2 inputs, 6 outputs with full matrix mixing Top-grade DSP Engine31 band parametric equalization per input channel
- 7 band parametric equalization per output channel
- Each band can be switched to Bell, Low/High Shelving with variable Q response
- Crossover filters with slopes from 6dB/Octave up to 48dB/Octave including Butterworth, Bessel, Linkwitz-Riley
- Each output features a dynamic range controller composed of a Peak Limiter.
- Adjustable Delay time up to 900 ms for every input channel, and up to 340 ms for every output channel
- Phase correction per output channel Direct PC/Network Connection Rear panel USB connector for direct PC communications
- RS485 connection for system setup, monitoring and control via fully manageable remote
- PC software Control Front panel interactive LCD display for local access and configuration
- Front panel 7-LED level meter indicators per channel
- Simultaneous control up to 32 units via PC software
- Up to 32 storable user presets
- Security Lockout
| ENIGMA 26i is a cost-effective 2-IN/6-OUT digital speaker management system. | |||||||||
| Designed to be catered for any crossover configuration, it provides the suitable processing and control for live application use. | |||||||||
| It offers 2 analog inputs, and 6 analog outputs, managed by a powerful DSP engine, in addition to 24 Bit AD/DA converters. | |||||||||
| Each input channel provides a choice of EQ with a 31-band parametric EQ, gain control, noise gate function, RMS compressor, internal white/pink noise generator and configurable delay. | |||||||||
| Each output offers up to 7-band of parametric equalization into the crossover filters which themselves provide slopes from 6dB/octave up to 48dB/octave. | |||||||||
| Each output path also features peak limiter and driver alignment delay. | |||||||||
| The ENIGMA 26i supports a full matrix mixing mode where inputs may be routed/mixed in any ratio to any output. | |||||||||
| For remote configuration and control, the ENIGMA 26i can be connected via USB or RS485 connections. | |||||||||
| The control remote PC software allows simultaneous control up to 32 units, setting all parameters and showing real time levels. | |||||||||
Designed to be catered for any crossover configuration, it provides the suitable processing and control for live application use.
| Analog input | 2 x XLR electronically balanced |
|---|---|
| Analog output | 6 x XLR electronically balanced |
| AD & DA converters | 24bit 96kHz |
| Minimum load | 150 ohms |
| THD+N | 0.005% at 1kHz 0dBu, 0.01% at 1kHz 16dBu |
| 0.01% at 1kHz 16dBu | |
| S/N | >106 dB |
| Frequency response | 20Hz – 20kHz; ±0.5dB |
| DSP resolution | 24×32 bit for filtering process; 96 bits resolution on intermediate computation results |
| Parametric equalization | 31 filters per input selected as bell or shelving; 7 filters per output selected as bell or shelving |
| Filter type | Bell, shelving |
| Filter gain | From -15dB up to +15dB by 0.5dB resolution steps |
| Centre frequency | Selectable with a 1/24th of octave resolution step from 20Hz up to 20kHz |
| Filter Q/BW | Q from 0.4 up to 12 by 0.1 resolution steps |
| Crossover section HPF/LPF | Butterworth 6/12/18/24 dB per octave |
| Crossover section HPF/LPF | Bessel 12/24 dB per octave |
| Crossover section HPF/LPF | Linkwitz-Riley 12/24/36/48 dB per octave |
| Internal noise generator | White/Pink noise, level from -30dBu to 0dBu |
| Input noise gate | Threshold from -90 dBu up to -60 dBu |
| RMS Compressor | Threshold from -14 dBu up to +16dBu |
| RMS Compressor | Ratio: 2:1~100:1; Knee: 0%~100% |
| RMS Compressor | Attack time from 5ms up to 200ms |
| RMS Compressor | Release time from 0.1 sec up to 3 sec |
| Delay | 420 ms for every input channel and 128 ms for every output channel |
| Ground noise | -88 dBu |
| Device presets | 32 User presets |
| Front Panel | 2x24 character LCD display with green LED backlight |
| Front Panel | 7-LED meter per input channel -20dBu to +15dBu, clip |
| Front Panel | 7-LED meter per output channel -15dBu to +15dBu, clip or limiter mode |
| Front Panel | Blue LED (Edit) and Red LED (Mute) per channel |
| Front Panel | NAV/PM1 Rotary encoder push button switch |
| Front Panel | PM2, PM3, ENTER, ESC, UTILITY push button switches |
| Front Panel | EDIT/MUTE push button per channel |
| Front Panel | USB type B connector |
| Rear Panel | 2 x XLR female connector (Input) |
| Rear Panel | 6 x XLR male connector (Output) |
| Rear Panel | 1 x XLR female connector for RS485 (Input) |
| Rear Panel | 1 x XLR male connector for RS485 (Output) |
| Rear Panel | 2 x Ground-lift toggle switch |
| Rear Panel | IEC C13 16A connector; Power on/off switch |
| Main AC | 90-240VAC (50/60Hz) – 40W |
| Dimensions | 19”x 1.75”x 9” (483x44x229mm) 1RU |
| Package size | 560x320x110(mm) |
| Weight, Net / Shipping | 6.61 lbs (3.0 Kg) / 7.71 lbs (3.5 Kg) |
